Headlight Booster

Want more JUICE out of your stock headlight, and do not want to modify your existing wiring. Click to learn more.

HID charging conversion

Are you tired of Battery depletion everytime you uses your newly installed High Intensity Discharge Headlight, Click for solutions.

Fixing OIL drain plug thread

Are you looking for fixing that oil drain plug that went bad and unable to thread that bolt due to loose thread, Here is an easy solution for, CLICK for detais.

Led Light Solution

Wanting to conserve battery power of your motorcycle? Why not change all of your indicator BULBS, such as signal light, tail light and brake light to LED BULBS. Click for more info.


CDI is the heart of your ignition, wanting more power than STOCK but do not want to buy such RACING CDI? You need to know how it work first to understand where to START improving the ignition. Click for more.

Horn Interrupter

Want to have a horn sounds like a machine gun that produces successive sound with only one press of the HORN switch, add spice to that annoying stock horn, CLICK for details.

Reusable OIL filter mod

Paper element OIL filter tends to suffer from clogging, so why not try this filter mod I am using with my small motorcycle for more OIL flow.

Related Posts with Thumbnails

Last Updated: March 10, 2013

Inside E27 5 Watts Led

I know many of you wondering what's inside a household led lighting such as this one shown on the photo. A 5 watts led light with E27 type socket, same as those CCFL energy saving lamp. They are commonly been found nationwide on hardware store, supermarket and electronic supplies at an affordable price. Being an enthusiast and a DIY'er, i got curious again what was inside this kind of household lighting. I recently bought one for another experimentation and wanted to take a peek inside.

By twisting the diffuser, at last the leds came out and i wasn't surprised at all. 5 pieces of 1 watt led was used to bring out the 5 watts specification of this led lighting. They were soldered on an aluminum piece of PCB, to where they will act as the minimum heatsink, and the violet (purple) fins as the main thermal support for the assembly. Getting deeper onto it, i desoldered the board to the main heatsink and